How to Clean Your Oxygen Concentrator
Oxygen concentrators require standard cleaning and appropriate maintenance to have the option to work effectively. Changing the oxygen treatment hardware can be overpowering from the outset. Be that as it may, as you gain proficiency with the fundamental ability on the maintenance and appropriate upkeep of these machines, you will think that it’s simpler to manage.
Here is a manual to assist you with getting standard practices for oxygen concentrator maintenance and oxygen tubing care.
Step by step instructions to PROPERLY CLEAN OXYGEN CONCENTRATORS
Keep a standard system and practice for oxygen concentrator maintenance to help complete your cleaning each time productively. Here are the cleaning materials you will require:
• A delicate cleaning material
• A mellow cleanser, the most ideal decision would be a fluid dishwashing cleanser
• Soft hand towel
• White vinegar - for cleaning the nasal cannula
Before you begin cleaning, here is the oxygen concentrator maintenance agenda:
• Power off the oxygen concentrator by unplugging it from any force source.
• And after cleaning, try to dry the hardware and use it simply after it is totally dry.
CLEAN THE OUTSIDE OF THE OXYGEN CONCENTRATORS
• The outside of the oxygen concentrators will probably be covered with grime or stuck-on soil, which will slacken off with a clammy material itself.
• Dampen your cleaning fabric with water and wring it well so it is wet however not trickling with water
• Add a drop of the gentle cleanser to the material
• Wipe the outside of the concentrator tenderly and rub solidly with the goal that the stuck-on grime is cleaned well. Try to work cautiously around the vents so as not to harm the hardware.
• After an underlying wipe with cleanser, flush the fabric and by and by wipe the surface to eliminate the sudsy layer.
Step by step instructions to CLEAN OXYGEN CONCENTRATOR FILTER
• Power off the concentrator for oxygen concentrator channel change.
• Use your hardware manual to appropriately find and eliminate the channel. Ensure your machine stays killed until the channel is reconnected.
• Clean the channel by utilizing running water under your tap.
• For more obstinate stains or spots, utilize a gentle cleanser to take it off utilizing your fingers while the channel is as yet under the running water.
• Let the air channel dry and hang in a clean shower towel. Keep it in a very much ventilated room far off from vermin and pets.
• Make sure it is totally dry before you reattach it to your concentrator.
CLEANING THE NASAL CANNULA
How to clean nasal cannula? For cleaning the nasal cannula, you should follow these means
• Add in a couple of drops of cleaner to water gathered in a tub or a restroom sink
• Soak the nasal cannula in the water
• Use a delicate material or cleaning q-tip to clean out the residue and earth gathered in and around the spout zone. Try to be delicate when you clean it. This will help you in oxygen concentrator maintenance.
• Once cleaned, take out the nasal cannula and set it to dry on a dry shower towel
• Empty the sink and ensure no cleanser buildup is forgotten about. You can moreover wash the sink with clean water twice to ensure it doesn't have any cleanser materials left.
• Mix clean water with white vinegar in the proportion of 1:10 in the sink. This combination goes about as a sanitizer that cleans out organisms from your nasal cannula. Absorb the nasal cannula this blend.
• Remove the nasal cannula for a few minutes and flush it well.
• Air-dry the nasal cannula and use it once it is totally dry. Try to keep it out of daylight and high temperatures.
Very informative post regarding cleaning of oxygen concentrator
ReplyDelete